Table of Contents
Advertisement
FIELD
Own CLID
Peer IP Address
Peer CLID
Ethernet
Status
TxPkts
RxPkts
Collision
Total Outcall Time
CPU Load
LAN Packet Which
Triggered Last Call
Commands
Drop B1
Drop B2
Reset Counters
Drop All
20.3 System Information and Console Port Speed
This section describes your system and allows you to choose different console port speeds. To get to the
System Information and Console Port Speed:
Step 1.
Enter 24 to go to Menu 24 – System Maintenance.
Step 2.
Enter 2 to open Menu 24.2 – System Information and Console Port Speed.
Step 3.
From this menu you have two choices as shown in the next figure:
System Information and Diagnosis
Table 20-1 Menu 24.1 System Maintenance Status
Shows your Caller ID.
This refers to the IP address of the peer.
This shows the Caller ID of the peer.
This shows statistics for the LAN.
This displays the port speed and duplex setting.
This is the number of transmitted packets to the LAN.
This is the number of received packets from the LAN.
This is the number of collisions.
This shows the total outgoing call time for both B1 and B2 channels since the
system has been powered up.
This specifies the percentage of CPU utilization.
This shows the first 48 octets of the LAN packet that triggered the last outgoing
call.
This command drops the B1 channel.
This command drops the B2 channel.
This command resets all counters.
This command drops all channels.
Prestige 202H User's Guide
DESCRIPTION
20-3
Advertisement
Table of Contents
