Pre-Shared Key; Ipsec Setup; Table 26-6 Mismatching Id Type And Content Configuration Example - ZyXEL Communications Prestige 202H User Manual

Prestige 202H User's Guide
Peer ID type: IP
Peer ID content: 1.1.1.2
The two Prestiges in this example cannot complete their negotiation because Prestige B's Local ID type is
IP, but Prestige A's Peer ID type is set to E-mail. An "ID mismatched" message displays in the IPSEC
LOG.

Table 26-6 Mismatching ID Type and Content Configuration Example

Local ID type: IP
Local ID content: 1.1.1.10
Peer ID type: E-mail
Peer ID content: aa@yahoo.com

26.8 Pre-Shared Key

A pre-shared key identifies a communicating party during a phase 1 IKE negotiation (see section 26.10 for
more on IKE phases). It is called "pre-shared" because you have to share it with another party before you can
communicate with them over a secure connection.

26.9 IPSec Setup

Select Edit in the Select Command field, type the index number of a rule in the Select Rule field and press
[ENTER] to edit the VPN using the menu shown next.
You must also configure menu 27.1.1.1 or menu 27.1.1.2 to fully configure and use
26-10
PRESTIGE A
Peer ID type: E-mail
Peer ID content: tom@yourcompany.com
PRESTIGE B
Local ID type: IP
Local ID content: 1.1.1.10
Peer ID type: IP
Peer ID content: N/A
a VPN.
VPN/IPSec Setup