ZyXEL Communications Prestige 202H User Manual page 95

FIELD
Recv Authen
Compression
Mutual Authen
O/G Username
O/G Password
Multiple Link Options:
Max Trans Rate(Kbps)
Callback Budget Management:
Allocated Budget
(min)
Period (hr)
IP Address Supplied By:
Dial-in Setup
Table 10-2 Menu 13 Default Dial-in Setup
This field sets the authentication protocol for incoming calls. For
security reason, setting authentication to None is strongly
discouraged. Options for this field are:
CHAP/PAP – Your Prestige will try CHAP first, but PAP will be
used if CHAP is not available.
CHAP – Use CHAP only.
PAP – Use PAP only.
None – Your Prestige tries to acquire CHAP/PAP first, but no
authentication is required if CHAP/PAP is not available.
Turn on/off Stac Compression. The default for this field is No.
Some vendors, e.g., Cisco, require mutual authentication, i.e.,
the node that initiates the call will request a user name and
password from the far end that it is dialing to. If the remote node
requires mutual authentication, set this field to Yes.
Enter the login name to be used to respond to the peer's
authentication request.
Enter the outgoing password to be used to respond to the peer's
authentication request.
Enter the maximum data transfer rate between your Prestige and
the remote dial-in user. 64 – At most, one B channel is used. 128
– A maximum of two channels can be used. When the Prestige
calls back to the remote dial-in user, the maximum data transfer
rate is always 64.
This field sets the budget callback time for all the remote dial-in
users. The default for this field is 0 for no budget control.
This field sets the time interval to reset the above callback
budget control.
DESCRIPTION
Prestige 202H User's Guide
EXAMPLE
CHAP/PAP
Yes
No
128
0 (default)
10-3