Table of Contents
Advertisement
Prestige 202H User's Guide
The following figure illustrates the configuration used in this example.
RVS-COM lite
Before entering any configurations, you must install the CAPI driver (RVS-CE) and communication program
such as RVS-COM Lite on your computer.
5.3.3 RVS-COM
RVS-COM includes an ISDN CAPI driver with its communication program. RVS-CE (Core Engine) is an
ISDN-CAPI 2.0 driver for Windows 95/98/NT that can be used by different ISDN communication programs
(such as AVM Fritz or RVS-COM) to access the ISDN on the Prestige.
NetCAPI can carry out CAPI applications only if the CAPI driver is installed on your computer. In addition
to the CAPI driver, you will need a communication software program such as RVS-COM Lite, Fritz etc., for
users to access CAPI.
The ISDN router is a shared device and can be used by several different client computers at the same time:
e.g. one computer sending a fax, another computer doing a file transfer. RVS-COM has to be installed on
each client computer in order to share the ISDN lines.
Example of Installing CAPI driver and Communication Software
Please uninstall previous versions of "RVS-CAPI" and "RVS-COM lite" before you
install the new versions. Click the Windows "START, Settings, Control Panel,
Add/Remove Programs" to uninstall RVS-CAPI and RVS-COM.
To install the CAPI driver and the communication software, enter one of the license keys of your RVS-COM
Lite CD-ROM and follow the instructions on the configuration wizard. When you install RVS-Lite, RVS-
COM AUTOMATICALLY installs CAPI driver before installing RVS-Lite.
If you did not install RVS-Lite and want to use other programs such as AVM Fritz to
access the ISDN router, you must first install the CAPI driver - RVS-CE using the
5-6
Prestige
192.168.1.33
192.168.1.1
NetCAPI
RVS-CE
Figure 5-5 Configuration Example
ISDN
ISDN Setup
Advertisement
Table of Contents
