Firmware Upload; Configuration File Upload; Figure 11-5 Menu 24.7 - System Maintenance - Upload Firmware; Figure 11-6 Menu 24.7.1 - Upload System Firmware - ZyXEL Communications PRESTIGE 650H-13 User Manual

Figure 11-5 Menu 24.7 — System Maintenance — Upload Firmware
The configuration data, system-related data, the error log and the trace log are all stored in the configuration
file. Please be aware that uploading the configuration file replaces everything contained within.

11.4.1 Firmware Upload

FTP is the preferred method for uploading the firmware and configuration. To use this feature, your
computer must have an FTP client.
When you telnet into the Prestige, you will see the following screens for uploading firmware and the
configuration file using FTP.
To upload the system firmware, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
of your firmware upgrade file on your workstation and "ras" is the
remote file name on the system.
4. The system reboots automatically after a successful firmware upload.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.

11.4.2 Configuration File Upload

You see the following screen when you telnet into menu 24.7.2.
Firmware and Configuration File Maintenance
Menu 24.7 -- System Maintenance - Upload Firmware
1. Upload System Firmware
2. Upload System Configuration File
Enter Menu Selection Number:
Menu 24.7.1 - System Maintenance - Upload System Firmware
Press ENTER to Exit:
Figure 11-6 Menu 24.7.1 — Upload System Firmware
Prestige 650H ADSL Router
11-7