Mount The Bvm Uat; Mount Rx Batteries - BVM GO FLY GOLD PNP F-16 C Manual

1/6 scale
Table of Contents

Advertisement

Mount the BVM UAT

 Insert the UAT into the opening provided. Two zip ties are used to secure. The rear zip
tie goes through the holes and holds the aft end from rising, while the front zip tie
wraps around the board, just aft of the bulkhead.
Note: early models will need about 1/8" of material trimmed from the ply bulkhead.

Mount RX Batteries

 Use sticky back Velcro and Velcro strap to mount the batteries as shown.
 Keep batteries forward to clear cockpit tub. It may be necessary to remove and discard
the front tray if thicker batteries are used.
BVM ®2021
20
10/8/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GO FLY GOLD BVM PNP F-16 C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents