Table of Contents
Advertisement
Mark the mounting holes.
In the case of the Cheetah install,
material will need to be removed from
the engine rails as marked. See
photos on following pages.
Use a Dremel wheel to remove the
material marked with Blue Masking
Tape. The dimension shown is 3.25".
A vertical cut of .375" will be made to
clear the plywood mounting rails.
Test fit the lower bypass to the pipe
and engine mounting rails.
BVM ®2021
24
10/8/2021
Advertisement
Table of Contents
Need help?
Do you have a question about the GO FLY GOLD BVM PNP F-16 C and is the answer not in the manual?
Questions and answers