Table of Contents
Advertisement
Table lock
Table handle
Table height adjustment:
Table height adjustment is
accomplished by loosening the clamp
Bolt, then adjusting the table with the
bracket handle to desired height. After
table is at working height, retighten
the clamp bolt securely.
Note: Keep table adjustment rack
clean from debris. Never attempt to
move table with clamp bolt tightened.
Table tilting adjustment:
Using an adjustable or box wrench,
loosen table level lock bolt. Carefully tilt
the table to the degree needed, as shown
on the angle index scale located on the
table rotation point. Retighten nut
securely.
Note: Never tilt table if any material or
fixturing is on it. Only make adjustments
when table is free of loose articles.
Table swing adjustment:
To swing the table up to 360 degrees,
loosen the clamp release bolt and swing
table to the desired position. After the
table is in the correct position tighten
clamp release bolt securely.
Note: Never swing table if any material or
fixturing is on it. Only make adjustments
when table is free of loose articles.
9
Advertisement
Table of Contents
