Selecting From Voice Condition; Page 1]; Touch Tone - Yamaha Electone EL-500 Owner's Manual

4
Upper/Lower
Pedal
NOTE:
Generally, After Touch has no effect on
percussive voices (such as Piano,
Harpsichord or Vibraphone) or
percussion sounds.
NOTE:
Minimum setting produces no effect at
all.
NOTE:
In the case of the EL-500 the Touch
Tone (Initial/After) value of the Pedal
Voice section is grayed out and is not
accessible. However, the value can be
controlled from the MDR or an external
device through MIDI.
1

Selecting from Voice Condition

Pages
To call up the Voice Condition page:
Choose a voice on the panel, then press that voice's panel button again (or
again press the Data Control button corresponding to the selected voice).
VIOLIN
OBOE
EL-700
The Voice Condition display pages of the various voice sections have slight
differences in their functions.
Each function in the Voice Condition page is independently applied to each
voice section.
Voice Condition [PAGE 1]
1 1
-1 -2
1

1 TOUCH TONE

The Touch Tone function gives you expressive control over the volume and
timbre of a voice. Two types of keyboard touch affect this function: Initial
Touch and After Touch.
All voices are provided with this expressive function, making it possible to
perfectly reproduce the subtle dynamic and tonal changes of actual
instruments. For example, piano voices sound much brighter when you hit
the keys strongly, especially in the attack portion of the sound — exactly as if
you were playing an acoustic piano.
1
INITIAL Touch
-1
Controls volume and timbre according to the velocity at which you
strike the keys. The harder you strike the keys, the greater the
volume and the brighter the timbre will become.
1
AFTER Touch
-2
Controls volume and timbre according to the pressure you apply to
the keys after playing them. The harder, you press down on the
keys, the greater the volume and the brighter the timbre will become.
42
LEAD VOICE
BRILLIANCE VOLUME
BRILLIANT MAX
FLUTE
1
TRUM- TO
PET LOWER
MELLOW MIN
2 3 4 5