Replacing Consumables For S1300I - Fujitsu ScanSnap iX1400 Basic Operation Manual

Replacing Consumables for S1300i

This section explains how to replace the pad assy and the pick roller assembly.
ATTENTION
The bottom part of the ScanSnap may become hot when the ScanSnap is being used but this does not
affect ScanSnap operation or cause any physical harm. Be careful not to drop the ScanSnap when
carrying it.
l "Replacing the Pad Assy (S1300i)" (page 486)
l "Replacing the Pick Roller Assembly (S1300i)" (page 489)
l Before replacing consumables, you must turn off the ScanSnap and unplug
the power connection cable (power cable or USB bus power cable) from the
power supply source (AC outlet or computer). Not doing so may cause fire
or electrical shock.
l Do not place internal parts such as the pad assy and the pick roller
assembly within reach of small children. Doing so may cause injury.
485
Replacing Consumables for S1300i