Checking The Mac Address Of The Scansnap (Ix1600 / Ix1500) - Fujitsu ScanSnap iX1400 Basic Operation Manual

Checking the MAC address of the ScanSnap (iX1600 / iX1500)

Check the MAC address of the ScanSnap on the touch panel.
1.
Press in the
display the [Settings] screen.
2.
Press
3.
Check that [Wi-Fi connect mode] is set to [Access point connection] or
[Direct connection].
If [Wi-Fi connect mode] is set to [Wi-Fi off], press [Wi-Fi connect mode] and set it to [Access
point connection] or [Direct connection]
4.
Press [Wi-Fi information] to display the [ScanSnap information] screen.
5.
Check the [MAC address] in the [Network] tab.
Registering a Certificate/ Checking the Wireless LAN Settings (iX1600 / iX1500)
home screen on the touch panel of the ScanSnap to
to display the [Wi-Fi settings] screen.
152