Documents To Scan (Ix100) - Fujitsu ScanSnap iX1400 Basic Operation Manual

Documents to Scan (iX100)

This section explains about the conditions for documents that can be loaded directly into the
ScanSnap and the conditions for documents that can be scanned using the Carrier Sheet.
Documents That Can Be Loaded Directly into the ScanSnap
Conditions for documents that can be loaded directly into the ScanSnap are as follows:
Eject method With the output guide closed
(*1)
Document type Office paper, postcards, business cards
Plastic cards conforming to the ISO7810 ID-1
type (54 × 86 mm/3.37 × 2.13 in.) (*2)
Paper weight
52 to 209 g/m
When merging scanned images
automatically (*3)
52 to 105 g/m
Plastic cards
0.76 mm (0.03 in.) or less (embossed cards
can be used)
Paper size
Width
25.4 to 216 mm (1 to 8.5 in.)
For a dual scan, a total width of 200 mm (7.87 in.) or less for two documents
Length
25.4 to 863 mm (1 to 34 in.)
When merging scanned images automatically (*3)
l A3 (297 × 420 mm)
l B4 (257 × 364 mm)
l Double Letter (11 × 17 in. (279.4 × 432 mm))
*1: For details about the eject methods, refer to
*2: A dual scan cannot be used for plastic cards.
*3: Fold in half to scan.
ATTENTION
l The following types of documents must not be scanned:
- Documents attached with the metals such as paper clips or staples that can damage the inside
of the ScanSnap
Remove the metals for scanning.
- Documents on which the ink is still wet
Wait until the ink dries completely to scan these documents.
- Documents larger than 216 × 863 (mm)/8.5 × 34 (in.) (width × length)
2
(14 to 56.1 lb)
2
(14 to 28 lb)
"Parts and Functions of iX100" (page
241
Scanning Documents with iX100
With the output guide open
Office paper
2
52 to 80 g/m (14 to 20 lb)
73).