Fujitsu ScanSnap iX1400 Basic Operation Manual page 307

4.
Press the [Scan] button on the ScanSnap (for three seconds or longer) until
the button flashes in blue to start a scan.
ATTENTION
l Secure enough space where the scanned documents are ejected from the ScanSnap, and
pick up the documents with your hands to prevent them from falling off the unit where the
ScanSnap is placed on.
l Do not perform the following operations during scanning. Doing so will stop scanning.
- Connect or disconnect the ScanSnap and other USB devices.
- Close the ADF paper chute (cover).
- Switch users.
- Allow the computer to enter sleep mode.
HINT
When you scan the first page as a long page and continue scanning, the subsequent documents
are also scanned as long pages.
a The [Scan] button on the ScanSnap flashes in blue while the documents are being
scanned.
The [ScanSnap Manager - Image scanning and file saving] window appears.
307
Scanning Documents with S1300i