Authenticating A Wireless Access Point With A Client Certificate (Ix1600 / Ix1500) - Fujitsu ScanSnap iX1400 Basic Operation Manual

Authenticating a Wireless Access Point with a Client Certificate
(iX1600 / iX1500)
To connect the ScanSnap to a wireless access point, use a client certificate or CA certificate that
has been registered on the ScanSnap to authenticate a connection to the wireless access point.
1.
On the touch panel of the ScanSnap, display the [Enter connection
information] screen.
1. Press
[Settings] screen.
2. Press
3. Press [Access point connection] to display the [Access point connection] screen.
4. Press [Access point connect settings] to display the [Connection information configuration
method] screen.
5. Select [Select an access point].
6. Press the [Next] button to display the [Select network] screen.
7. From the list of wireless access points that appears, select a wireless access point that you
want to connect to.
8. Press the [Next] button to display the [Enter connection information] screen.
2.
Press [Client certificate] and select the certificate to be used.
HINT
To check the details about the certificate, press the [Certificate] button.
3.
Press the [Next] button to display the [Select network] screen.
4.
Press the [Complete] button in the [Check Connection Results] screen.
5.
Press to return to the home screen.
in the home screen on the touch panel of the ScanSnap to display the
to display the [Wi-Fi settings] screen.
Access Point Connect Settings (iX1600 / iX1500)
163