Features - HITEC 44246 Instruction Manual

Features

Optimized Operating Software
The RDX1 Pro "auto" feature sets the charge and discharge current for you
automatically, preventing overcharging which can damage your battery. In the
event of an error, the RDX1 Pro instantly disconnects the circuit and sounds an
alarm. This feature can be set by the user and controlled through the two-way
link for maximum safety.
Program Select
The charger can store up to 10 different charge/discharge profiles for your
convenience. You can keep the data pertaining to program settings of the
battery for continuous charging or discharging. Users can call out this data at
any time without setting any additional programming.
Internal Independent Lithium Battery Balancer
The RDX1 Pro features a built-in cell voltage balancer so you don't need to fuss
with external balancers while charging.
Balancing Individual Cells During Discharging
When used with a balancing board the RDX1 Pro can monitor and balance each
cell in the pack individually while discharging. If the voltage of any single cell is
abnormal, the RDX1 Pro will display an error message and the process will end
automatically.
Adaptable to Various Types of Lithium Batteries
The RDX1 Pro will charge and discharge a variety of Lithium batteries such as
LiIon, LiPo, LiFe and the new higher voltage LiPo, (LiHV) batteries.
Multiple Lithium Battery Charge Modes
The RDX1 Pro features four methods of charging: Regular charge, Fast charge,
Balance charge and Storage charge modes. We highly recommend using
balance charge as it is the safest and best way to charge lithium chemistry
batteries. If you plan on not using your Lithium chemistry batteries for an
extended period of time, Storage charge mode is recommended to optimize
your packs for long term storage and maximum lifespan.
10