HITEC 44246 Instruction Manual page 14

Available Operations (continued)
Battery Type
NiMH
NiCd
Lead
Acid
Pb
Mavic Pro
14
Operation
The charger will charge NiMH and NiCd batteries
CHARGE
using the charge current set by the user.
In this program, the charger detects the condition
of the connected battery and automatically
charges the battery.
AUTO CHG
Note: You should set the upper limit of the charge
current to avoid damage by excessive charging current.
The RDX1 Pro may not be able to detect the charge
capacity of low resistance batteries.
DISCHARGE
In re-peak charge mode, the charger can peak
charge the battery once, twice, or three times in a
RE-PEAK
row automatically. This is good for confirming the
battery is fully charged and for checking how well
the battery receives fast charges.
Automatically charges/discharges the battery
CYCLE
up to 5 times. This process can enhance the
performance of NiMH/NiCd batteries.
CHARGE
This mode is for charging a Pb battery.
DISCHARGE
This mode is for discharging a Pb battery.
This mode is for charging a Mavic Pro battery
CHARGE
for flight.
This program is for charging or discharging
STORAGE MODE a Mavic Pro battery which will not be used
again for an extended period.
Operation Description
This mode is for discharging a NiMH/NiCd battery