HITEC 44246 Instruction Manual page 5

Table of Contents

Advertisement

Warnings and Safety Notes
A
Never attempt to charge or discharge the following types of batteries:
A battery fitted with an integral charge circuit or a protection circuit
A battery pack which consists of different types of cells (including
different manufacturer's cells)
A battery that is already fully charged or just slightly discharged and
non-rechargeable batteries (these pose an explosion hazard)
A faulty or damaged battery
Batteries installed in a device or which are electrically linked to other
components
Batteries that are not expressly stated by the manufacturer to be
suitable for the currents the charger delivers during the charge
process
PLEASE BEAR IN MIND THE FOLLOWING POINTS BEFORE YOU
COMMENCE CHARGING:
Did you select the appropriate program suitable for the type of battery you
are charging?
Did you set up the adequate current for charging or discharging?
Have you checked the battery voltage? Lithium battery packs can be wired
in parallel and in series, i.e. a 2-cell pack can be 3.7V (in parallel) or 7.4V (in
series).
Have you checked that all connections are firm and secure?
Make sure there are no intermittent contacts at any point in the circuit.
This warning will first appear on the
screen prior to having full use of the
charger. Press ENTER to acknowledge
Warning
you have read and understood all
warnings before using this charger.
IMPORTANT
WARNING
NEVER LEAVE CHARGER
UNATTENDED. BATTERY CHARGING
CAN BE DANGEROUS. PRESS ENTER
TO CONFIRM YOU HAVE READ
THE MANUAL & WARNINGS AND
UNDERSTAND THEM.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdx1 pro

Table of Contents