HITEC 44246 Instruction Manual page 16

PROGRAM SELECT(01)
Battery Type:
Battery Cells:
Mode:
C Current
PROGRAM SELECT(01)
Battery Type:
Battery Cells:
Mode:
C Current
PROGRAM SELECT(01)
Battery Type:
Battery Cells:
Mode:
C. Current
PROGRAM SELECT(01)
Battery Cells:
Mode:
C.Current
D. Current
16
Battery Cells
Press INC and DEC to scroll through the battery
LiPo
cells supported by the charger. Press START/
3S
ENTER to select the appropriate cells for your
Balance
battery.
3.3A
Mode Select
Press INC and DEC to scroll through all available
LiPo
modes. If you plan to charge your battery, select
3S
Charge mode. Press the START/ENTER button to
Balance
confirm the mode of your choice.
3.3A
C. Current (Charge Current)
The charger supports a maximum 10.0A
LiPo
charge current, but a current suitable for your
3S
battery should be set. It is inappropriate to
Balance
set a high charge current for a low capacity
3.3A
battery, as doing so would result in unwanted
consequences.
*NOTE: This mode is only available under the
Charge mode
D. Current (Discharge Current)
The charger supports a maximum -2.0A
3S
discharge current, but users should set the
Discharge
appropriate discharge current for the battery in
OFF
use.
-2.0A
* Note that this mode is only available under the
Discharge mode.