HITEC 44246 Instruction Manual page 22

SYSTEM SETUP
DC Input:
Cut Caps:
Cut Time:
Cut Temp:
SYSTEM SETUP
DC Input:
Cut Caps:
Cut Time:
Cut Temp:
SYSTEM SETUP
Unit:
Resting:
Delta Peak:
Bal. Connection:
SYSTEM SETUP
Unit:
Resting:
Delta Peak:
Bal. Connection:
22
Item
11.0V
5000mAh
120 Min
50 C/122 F
0 0
11.0V
5000mAh
120 Min
50 C/122 F
0 0
Celsius
10 Min
4mV
ON
Celsius
10 Min
4mV
ON
Selection
timer automatically runs at the
same time. This is programmed
OFF /
(1 - 720 Min)
faulty or if the termination circuit
cannot detect that the battery is
fully charged. The value for the
safety timer should be generous
enough to allow a full charge of
OFF /
temperature of the battery to rise.
(20 C / 68 F -
0 0
If the temperature limit is reached,
80 C / 176 F)
0 0
temperature sensor Part #44159
Celsius
Fahrenheit
Rest Time allows the battery to
1 - 60 Min
cool down between charging /
Description
When starting a charge
process, the built-in safety
to prevent the battery from
overcharging if it proves to be
the battery. Default is 120 Min.
When charging or discharging
batteries, internal chemical
reactions will cause the
the process will be terminated
NOTE: Requires the optional
Display the temperature in
Celsius or Fahrenheit.
discharging cycles.