HITEC 44246 Instruction Manual page 11

Input Power Monitoring
The RDX1 Pro input voltage is monitored to protect the battery from becoming
damaged. The process ends automatically if it drops below the limit.
Capacity and Temperature Limits
The charge process will terminate if either the charging capacity or battery
temperature exceeds the limit set by the user. The temperature function
requires an optional temperature probe, which is not included with the
RDX1 Pro.
Processing Time Limit
Protect your battery by setting a maximum time limit for charging and
discharging.
Cyclic Charging/Discharging
A battery can be cycled 1 to 5 times consecutively. This process is good for
refreshing and balancing your battery.
Maximum Safety
Our delta-peak voltage detection program ends the charge cycle whenever a
battery's voltage exceeds the set threshold.
Automatic Charging Current Limit
Charging current can be set by the user when charging Lithium, NiCd or NiMH
batteries. The 'AUTO' charging mode, however, is recommended when charging
NiMH batteries with low impedance and capacity.
LiPo Battery Meter
The user can check the battery's total voltage, the highest and lowest as well as
each cells voltage.
PC Control Using Charge Master Software
The free Charge Master software gives you unparalleled ability to operate the
charger through the computer. You can monitor pack voltage, cell voltage and
other data during the operation. Additionally, you have the ability to set up the
charger and update the firmware.
DJI Mavic Battery Program Charging and Discharging Capability
This charger is capable of charging and storing DJI Mavic Smart Batteries.
11