Using The Control Master - "Chargemaster - HITEC 44246 Instruction Manual

Warnings and Error Messages (cont.)
WARNING
OVER CHARGE
CAPACITY LIMIT
WARNING
OVER TIME LIMIT
WARNING
BATTERY WAS FULL
Using the Charge Control Software - "Charge Master"
The free "Charge Master" software gives you unparalleled ability to operate
the charger through the computer. You can monitor pack voltage, cell
voltage and other data while charging, view charge data in real-time graphs
and you can control charging and update firmware via the "Charge Master"
software. In order to connect the charger to the computer and use the
"Charge Master, " you will need a USB cable which is not included in this
package. The cable must end on one side with an "A" plug and the opposite
side with a "micro-B" plug to connect to the charger directly.
Download the latest Charge Master Software at:
http://hitecrcd.com/support/software-downloads, the RDX1 Pro uses the
Charge Master 2 software.
The battery capacity is more than the maximum
capacity which the user sets.
The charging time is longer than the maximum
charging time which is set by the user.
The battery voltage is higher than the
maximum voltage set by the user when
charging in balance mode.
27