Table of Contents
Advertisement
Setting the Time Out Option
You can set the time the machine waits before it restores the
default copy settings, if you do not start copying after changing
them on the control panel.
1
2
3
4
5
6
Collation Copying
The Collation copying feature is available only when you load
documents in the ADF.
1
2
3
4
5
3.8
C
OPYING
Press Menu on the control panel until "Copy Setup"
appears on the top line of the display.
Press the scroll button (
the bottom line.
Press Enter to access the menu item.
Press the scroll button (
appears on the display.
You can select from 15, 30, 60 and 180 (seconds).
Selecting "Off" means that the machine does not restore
the default settings until you press Start to start copying,
or Clear/Stop to cancel.
Press Enter to save the selection.
To return to Standby mode, press Clear/Stop.
Press Menu on the control panel until "Copy Setup"
appears on the top line of the display.
Press the scroll button ( ➛ or ❿ ) to display "Copy Collated"
on the bottom line.
Press Enter to access the menu item.
If you are making multiple copies and want to collate them,
press the scroll button ( ➛ or ❿ ) to set Collated Copy to
On
and press Enter.
"
"
1
1
2
2
3
3
œ
Collated Copy On
Press Start to begin copying.
or
) to display "Timeout" on
or
) until the status you want
1
2
1
2
œ
Collated Copy Off
3
3
Advertisement
Table of Contents
