Table of Contents
Advertisement
The following problems may cause print quality deviations, jamming or even damage
to the machine:
Symptom
Poor print quality or toner
adhesion, problems with
feeding
Dropout, jamming, curl
Increased gray background
shading/machine wear
Excessive curl problems with
feeding
Jamming, damage to
machine
Problems with feeding
N
:
OTES
• Do not use letterhead paper printed with low-temperature inks, such as those used in
some types of thermography.
• Do not use raised or embossed letterhead.
• The machine uses heat and pressure to fuse toner to the paper. Insure that any
colored paper or preprinted forms use inks that are compatible with this fusing
temperature (200 °C or 392 °F for 0.1 second).
Problem with Paper
Too moist, too rough, too
smooth or embossed; faulty
paper lot
Stored improperly
Too heavy
Too moist, wrong grain
direction or short-grain
construction
Cutouts or perforations
Ragged edges
Solution
Try another kind of paper,
between 100 ~ 400 Sheffield, 4
~ 5 % moisture content.
Store paper flat in its moisture-
proof wrapping.
Use lighter paper, use the rear
output slot.
• Use the rear output slot.
• Use long-grain paper.
Do not use paper with cutouts or
perforations.
Use good quality paper.
A
A.7
Advertisement
Table of Contents
