Table of Contents
Advertisement
7.6
M
AINTENANCE
4
Wipe the roller surface with a soft cloth dampened with water.
5
Carefully wipe the scanning glass with a soft dry cloth.
If the glass is very dirty, first wipe it with a slightly
dampened cloth, and then with a dry cloth. Be very careful
not to scratch the glass surface.
6
Replace the roller by inserting the left end first followed by the
right end, then rotating the bushing until it locks into place.
7
Reconnect the support and the control panel and then close
the control panel firmly until it clicks into place.
Advertisement
Table of Contents
