Planet WGS-804HPT Quick Installation Manual
Industrial wall-mount managed gigabit ethernet switch
Hide thumbs
Also See for WGS-804HPT:
- Quick installation manual (22 pages) ,
- User manual (373 pages) ,
- Quick installation manual (20 pages)
Subscribe to Our Youtube Channel
Related Manuals for Planet WGS-804HPT
Summary of Contents for Planet WGS-804HPT
- Page 1 Industrial Wall-mount Managed Gigabit Ethernet Switch WGS-804HPT WGS-4215-8T WGS-4215-8T2S WGS-4215-8P2S WGS-4215-16P2S Quick Installation Guide...
-
Page 2: Table Of Contents
6.1 C IP A ........... 26 ONFIGURING DDRESS 6.2 S ....28 TORING THE URRENT WITCH ONFIGURATION 7. RECOVERING BACK TO DEFAULT CONFIGURATION ..29 8. CUSTOMER SUPPORT ............30 - 2 - PLANET Technology Corp.2024... -
Page 3: Package Contents
Quick Installation Guide 1. Package Contents Thank you for purchasing PLANET Industrial Wall-mount Managed Gigabit Switch, WGS-804HPT or WGS-4215 series. The table below shows the models with the number of ports: Model Name 10/100/1000T 802.3at PoE 100/1000 SFP Copper Ports... - Page 4 RJ45 Dust Cap x 8 pcs SFP Dust Cap x 2 pcs (x16 for WGS-4215-16P2S (WGS-4215-8T2S/WGS-4215-8P2S/ only) WGS-4215-16P2S only) If any item is found missing or damaged, please contact your local reseller for replacement. - 4 - PLANET Technology Corp.2024...
-
Page 5: Requirements
It is recommended to use Google Chrome or above to access the Wall-mount Managed Switch. If the Web interface of the Note Wall-mount Managed Switch is not accessible, please turn off the anti-virus software or firewall and then try it again. - 5 - PLANET Technology Corp.2024... -
Page 6: Wiring The Power Inputs
WGS-4215-8T WGS-4215-8T2S 12~48V DC, 24V AC 12~48V DC WGS-804HPT 48~54V DC 48~54V DC WGS-4215-8P2S 48~54V DC 48~54V DC WGS-4215-16P2S 48~54V DC 48~54V DC Note: Maximum power requirements also rely on the real site application. - 6 - PLANET Technology Corp.2024... - Page 7 Note The device must be grounded. 3.2 DC Power Jack The WGS-804HPT and WGS-4215 PoE models require DC 48V~54V power input and the WGS-4215-8T and WGS-4215-8T2S require DC 12~48V power input. Should you have the issue of power connection, please contact your local sales representative.
- Page 8 Quick Installation Guide DC receptacle is 2.1mm wide that conforms to the WGS-4215 series 2.1mm DC jack's central post. Do not install any improper power adaptor - 8 - PLANET Technology Corp.2024...
-
Page 9: Hardware Installation
Step 1: Drive four 8mm diameter holes into the wall horizontally with the distance between the 2 holes is 133mm (WGS-804HPT/WGS-4215-8T), 163mm (WGS-4215-8T2S/WGS-4215-8P2S) and 230mm (WGS-4215-16P2S)(Refer to the table below). Step 2: Lightly hammer the wall anchors into the four holes. - Page 10 Quick Installation Guide Hole sizes for mounting Distance (mm) 8-port 8+2S 16+2S 4.2 Magnet Installation To install the Wall-mount Managed Switch on a magnetic surface, simply follow the following diagram: - 10 - PLANET Technology Corp.2024...
- Page 11 Turn the switch to the back and place the six round magnets with holes on the back of the switch where the holes are. Step 2: Turn the switch to front and push the plastic bolts into the holes to secure the magnets. - 11 - PLANET Technology Corp.2024...
- Page 12 As the magnetic mounting is not securely fixed, be aware that the switch will not fall or break due to vibration when Caution installing the switch. Please use the screw from the magnet kit to avoid Note breaking the device. - 12 - PLANET Technology Corp.2024...
- Page 13 DIN-rail on the Wall-mount Managed Switch. To hang up the Wall-mount Managed Switch, follow the steps below: Step 1: Screw the DIN-rail on the Wall-mount Managed Switch. Step 2: Lightly insert the DIN-rail into the track. - 13 - PLANET Technology Corp.2024...
- Page 14 Quick Installation Guide Step 3: Check whether the DIN-rail is tightly on the track. - 14 - PLANET Technology Corp.2024...
-
Page 15: Web Login
For example, the default IP address of the Wall-mount Managed Switch is 192.168.0.100, then the manager PC should be set to 192.168.0.x (where x is a number between 1 and 254, except 100) and the default subnet mask is 255.255.255.0. Figure 5-1: IP Management Diagram - 15 - PLANET Technology Corp.2024... - Page 16 When the following dialog box appears, please enter “admin” in both the default user name and password fields. The login screen in Figure 5-2 appears. Default IP Address: 192.168.0.100 Default Username: admin Default Password: admin Figure 5-2: Web Login Screen - 16 - PLANET Technology Corp.2024...
- Page 17 Find the MAC ID on your device label. The default password is "sw" or “mc” followed by the last six lowercase characters of the MAC ID. Figure 5-3: Industrial Managed Switch MAC ID Label - 17 - PLANET Technology Corp.2024...
- Page 18 4. Enter the default username and password, then set a new password according to the rule-based prompt and confirm it. Upon success, press any key to return to the login prompt. Log in with "admin" and the “new password” to access the Web interface. - 18 - PLANET Technology Corp.2024...
- Page 19 Quick Installation Guide Figure 5-6: Web Login with New Password The following web screen is based on the WGS-4215-8T2S. The display of the WGS-4215-8T2S is the same as those of the WGS-804HPT, WGS-4215-8T, WGS-4215-8P2S and WGS-4215-16P2S. - 19 - PLANET Technology Corp.2024...
- Page 20 The Switch Menu on the top of the Web page lets you access all the commands and statistics the Industrial Managed Switch provides. The Switch Menu always contains one or more buttons, such as “System”, “Switching”,, “QoS”, “Security”, “Ring” and “Maintenance”. Figure 5-8: Switch Menu - 20 - PLANET Technology Corp.2024...
- Page 21 Quick Installation Guide Figure 5-9: Switch Sub-menu Figure 5-10: Switch Sub-menu Now, you can use the Web management interface to continue the Switch management. Please refer to the user’s manual for more. - 21 - PLANET Technology Corp.2024...
-
Page 22: Saving Configuration Via The Web
Click ”Save > Save Configurations to FLASH” to log in “Configuration Manager” Page. Press the “Apply” button to save running configuration to start up configuration. - 22 - PLANET Technology Corp.2024... - Page 23 Quick Installation Guide - 23 - PLANET Technology Corp.2024...
-
Page 24: Ssh Login
Refer to 5.1 Starting Web Management to determine your initial login password. The following web screen is based on the firmware version before February of 2024. Default IP Address: 192.168.0.100 Default Username: admin Default Password: admin - 24 - PLANET Technology Corp.2024... - Page 25 Enter the default username and password, then set a new password according to the rule-based prompt and confirm it. Upon success, press any key to return to the login prompt. Log in with "admin" and the “new password” to access the CLI. - 25 - PLANET Technology Corp.2024...
-
Page 26: Configuring Ip Address
To check the current IP address or modify a new IP address for the Switch, please use the procedure as follows: Display of the Current IP Address At the “#” prompt, enter “show ip”. The screen displays the current IP address shown in Figure 6-2. - 26 - PLANET Technology Corp.2024... - Page 27 The previous command would apply the following settings for the Wall-mount Managed Switch. IP Address: 192.168.1.100 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.254 Figure 6-5: Configuring IP Address Screen Repeat step 1 to check if the IP address has changed. - 27 - PLANET Technology Corp.2024...
-
Page 28: Storing The Current Switch Configuration
Wall-mount Managed Switch through the new IP address. If you are not familiar with the Telnet command or the related parameter, enter “?” anytime in console to get the help description. - 28 - PLANET Technology Corp.2024... -
Page 29: Recovering Back To Default Configuration
5 seconds. After the device is rebooted, you can log in the Web interface management within the same subnet of 192.168.0.xx. Figure 7-1: WGS-804HPT/WGS-4215-8T Reset Button Figure 7-2: WGS-4215-8T2S/WGS-4215-8P2S Reset Button Figure 7-3: WGS-4215-16P2S Reset Button - 29 - PLANET Technology Corp.2024... -
Page 30: Customer Support
8. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team.
Need help?
Do you have a question about the WGS-804HPT and is the answer not in the manual?
Questions and answers