INSTALLATION
Notice before installation
This hood is designed for fitting in a cabinet or on some other support.
Warning: consult local regulations regarding fumes outlets. Do not connect the hood to a
fume, ventilation or hot air duct. Confirm that room ventilation is appropriate with the local
authorities. Make sure the maximum air extraction flow rate for the appliances in the room
does not exceed 4 Pa (0.04 mbar). The room must have adequate ventilation if an extractor
hood is used simultaneously with appliances that run on gas or other fuels. The evacuated
air must be extracted through ducts that are used for evacuating fumes from appliances
that run on gas or other fuels. Regulations regarding air extraction must be complied with.
This product is intended for HOUSEHOLD USE only.
Use a rigid PVC pipe or aluminium pipe with a min. Ø l25 mm or Ø l52 mm to evacuate
fumes outside. The above restrictions do not apply to hoods with no fumes outlet to outside
(recirculation system with activated charcoal filter).
Install the hood in line with the instructions on the template. For gas cooking appliances
only: the minimum distance to the hood must be at least 65 cm.
Warning: Failure to install the screws or fixing device in accordance with these
instructions may result in electrical hazards.
P.4