Instructions for installation, maintenance and use
General indications
•
Before installing and using the hood, be sure that the voltage (V) and the frequency (Hz)
indicated on the rating label match the voltage and frequency at the installation site.
•
The rating label and technical data are shown on the inside of the product.
•
For better performance in extracting fumes we advise that tubing installed should be of
a diameter not less than 125/152 mm. We also advise using rigid PVC tubing.
Electrical Connection
Connect the cord to a socket, which must have a minimum contact opening distance of 3
mm. The manufacturer shall not be liable for failure to observe all safety regulations in force
for the correct and normal operation of electrical parts.
Control Panel
Five-button control panel
This panel is situated on the front of the extractor and includes:
•
3 control switches for the motor (speed positions 1, 2 and 3) (ref. W)
•
Off button of the motor (ref. V)
•
On/off light of the motor (ref. T)
•
Light switch (ref. U)
P.10