Rs232/422 Connection Between The Hdbaset Receiver And The Controller - Bolin Technology VCC-7 Series User Manual

RS232/422 Connection between the HDBaseT receiver and the controller:

To make the RS232/RS422/RS485 control cable connection between the HDBaseT receiver and the
controller:
Use CAT6 network cable to make the RJ45 connector to connect to the HDBaseT Receiver.
1.
a) RS232: Make RJ45 connector for HDBaseT Receiver RS232 port as following:
b) RS422: Make RJ45 connector for HDBaseT Receiver RS422 port as following:
27