2: Nac; 3=Relays - Honeywell Fire-Lite Alarms MS-5UD Series Manual

Operating Instructions
•
•
•
•
•
•
4.19.2 NAC
Pressing 2 while viewing Read Status Screen #1 will display the following screen:
The operator can press 1 to view the programmed options for NAC 1, 2 to view the programmed
options for NAC 2, 3 to view the programmed options for NAC 3, or 4 to view the programmed
options for NAC 4.
The resulting screens will display the following information:
•
•
•
•
•
4.19.3 Relays
READ STATUS
Pressing 3 while viewing Read Status Screen #1 will display the following screen:
1=INPUT ZONES
2=NACS

3=RELAYS

Read Status Screen #1
This screen allows the operator to view the programmed option for each relay.
122
PAS (Positive Alarm Sequence) Yes/No (for detectors only)
Pre-Signal Yes/No (for detectors only)
Input Zone Freeze Supervision
Adjective/Noun descriptor
ACC Message
Description
1=NAC 1
2=NAC 2
Enable/Disable Status
Coding Selection (Temporal, Steady, etc.)
Silenceable/Nonsilenceable
Auto Silence Enable/Disable and time delay (in minutes)
Silence Inhibit Enabled/Disabled
1=RELAY 1
2=RELAY 2
3=RELAY 3
NAC STATUS
3=NAC 3
4=NAC 4
RELAY
ALARM
TROUBLE
SUPERV
MS-5UD & MS-10UD Series Manual — P/N 52626:C2 1/24/2012
Read Status