3=Walktest; 4: Time-Date - Honeywell Fire-Lite Alarms MS-5UD Series Manual

Programming
3.6.3 Walktest
PROGRAMMING
1=INPUT ZONES
2=HISTORY

3=WALKTEST

Maintenance Screen #1
3.6.4 Time-Date
PROGRAMMING
1=TIME-DATE
Maintenance Screen #2
108
To perform a walktest, press 3 while viewing Maintenance Screen #1. The following screen will be
displayed:
1=SILENT
2=AUDIBLE
3=VIEW RESULT
The operator can press 1 to perform a silent walktest or 2 to perform an audible walktest. The dis-
play will read UNIT IN WALKTEST. To end the Walktest, press the Esc (Escape) key.
Pressing 3 after the walktest has been completed, will allow the operator to view the results of the
walktest.
To program the time and date into the control panel, press 1 while viewing Maintenance Screen #2.
The following display will appear:
1=TIME
2=DATE
3=CLOCK FORMAT
To change the time, press 1 to display the following screen:
1=AM
A flashing cursor will appear on the left side of the display. Enter the four digit number corre-
sponding to the time (0000 - 1259). When the fourth digit is entered, the cursor will move one
position to the right. Press 1 for AM or 2 for PM to complete entering the time. The display will
return to the Time and Date Screen displaying the new time.
WALKTEST
Walktest Screen
TIME AND DATE
01-01-2001
Time and Date Screen
ENTER TIME AS 12HRS
:
01:00 AM
Time Screen
MS-5UD & MS-10UD Series Manual — P/N 52626:C2 1/24/2012
Maintenance Programming Level
01:00 AM
12HRS
2=PM