Table of Contents
Advertisement
Transmittal Priorities
The table below shows UL listed receivers which are compatible with the MS-5UD and MS-10UD.
Format
0
SIA-DCS-8
1
SIA-DCS-20
2
Ademco Contact ID
1.
With 685-8 Line Card with Rev. 4.4d software
2.
With 124060V206B and 124063 Line Card Rev. B
3.
With version V2.4 Receiver and 126047 Line Card Rev. G
4.
With 124077V2.00 Receiver and 126047 Line Card Rev. M
5.
With V.7301 Receiver S/W
6.
With 01.01.03 Receiver S/W and Line Card 01.01.03
7.
With software V1.86
8.
With software V1.72
9.
With DSP4016 and V1.6 Line Card
10. With software V3.9
IMPORTANT! It is the installer's responsibility to ensure that the Digital Alarm Communica-
tor/Transmitter is compatible with the Central Station Receiver, utilized by the monitoring service,
prior to installation. The Compatibility Table provides a list of compatible receivers and associated
software versions for the receivers. Changes in the hardware and/or software by the receiver man-
ufacturers may affect the receiver compatibility with the FACP DACT. After completing the instal-
lation, communication between the DACT and Central Station Receiver must be tested and
verified.
MS-5UD & MS-10UD Series Manual — P/N 52626:C2 1/24/2012
Table 5.1 Compatible UL Listed Receivers
Central Station Communications
131
Advertisement
Table of Contents
