Chapter 1 Introduction; Overview - Cobalt Digital Inc 9433-EMDE-75 Product Manual

Overview

9433EMDE-75-110-OM (V1.6)
Note: This manual is applicable for models:
• 9433-EMDE-75/110-EOOE (Fiber Transceiver)
• 9433-EMDE-75/110-EO (Fiber Transmitter)
• 9433-EMDE-75/110-OE (Fiber Receiver)
All models function identically except for fiber I/O interface differences.
Differences between these models are noted where applicable. In all other
aspects, all versions function identically as described in this manual.
This manual provides installation and operating instructions for the
9433-EMDE-75/110 3G/HD/SD-SDI Fiber-Optic Converters with
16-Channel Unbalanced/Balanced AES Embed / De-Embed cards noted
above (with all models collectively referred to herein as 9433-EMDE-75/110).
This manual consists of the following chapters:
Chapter 1, "Introduction" – Provides information about this manual
•
and what is covered. Also provides general information regarding the
9433-EMDE-75/110.
Chapter 2, "Installation and Setup" – Provides instructions for
•
installing the 9433-EMDE-75/110 in a frame, and optionally
installing a Rear I/O Module(s).
Chapter 3, "Operating Instructions" – Provides overviews of
•
operating controls and instructions for using the 9433-EMDE-75/110.
This chapter contains the following information:
9433-EMDE-75/110 Card Software Versions and this
•
Manual (p. 1-2)
Manual Conventions (p. 1-3)
•
Safety and Regulatory Summary (p. 1-5)
•
9433-EMDE-75/110 Functional Description (p. 1-6)
•
Technical Specifications (p. 1-10)
•
Warranty and Service Information (p. 1-12)
•
Contact Cobalt Digital Inc. (p. 1-13)
•
9433-EMDE-75/110 PRODUCT MANUAL
Chapter 1
Introduction
Chapter 1
1-1