Setting Up 9433-Emde-75/110 Network Remote Control - Cobalt Digital Inc 9433-EMDE-75 Product Manual

Installation and Setup

Setting Up 9433-EMDE-75/110 Network Remote Control

9433EMDE-75-110-OM (V1.6)
Setting Up 9433-EMDE-75/110 Network Remote Control
Perform remote control setup in accordance with Cobalt
"Remote Control User Guide" (PN 9000RCS-RM).
Note: • If network remote control is to be used for the frame and the frame has not
yet been set up for remote control, Cobalt
Control User Guide (PN 9000RCS-RM) provides thorough information and
step-by-step instructions for setting up network remote control of Cobalt
cards using DashBoard™. (Cobalt
Remote Control Panel product manuals have complete instructions for
setting up remote control using a Remote Control Panel.)
Download a copy of this guide by clicking on the
Support>Reference Documents link at www.cobaltdigital.com and then
select DashBoard Remote Control Setup Guide as a download, or contact
®
Cobalt as listed in Contact Cobalt Digital Inc. (p. 1-13).
• If installing a card in a frame already equipped for, and connected to
DashBoard™, no network setup is required for the card. The card will be dis-
covered by DashBoard™ and be ready for use.
9433-EMDE-75/110 PRODUCT MANUAL
®
reference guide
®
reference guide Remote
®
OGCP-9000 and OGCP-9000/CC
®
2-7