Chapter 1 Introduction; Overview - Cobalt Digital Inc 9926-xHtoS Product Manual

Overview

9926-xHtoS-OM (V1.2)
Note: This manual covers the 9926 series of openGear
sync cards, which consists of the:
- 9926-4HtoS 3G/HD/SD Quad-Channel openGear
with Per-Channel Frame Sync
- 9926-2HtoS 3G/HD/SD Dual-Channel openGear
with Per-Channel Frame Sync
These cards vary primarily in the channel capacity of HDMI-to-SDI
processing. Where differences exist, the differences are described for each
individual model.
This manual provides installation and operating instructions for the
9926 cards specified above (also collectively referred to herein as the
9926-xHtoS).
This manual consists of the following chapters:
Chapter 1, "Introduction" – Provides information about this manual
•
and what is covered. Also provides general information regarding the
9926-xHtoS.
Chapter 2, "Installation and Setup" – Provides instructions for
•
installing the 9926-xHtoS in a frame, and optionally installing a
9926-xHtoS Rear I/O Module.
Chapter 3, "Operating Instructions" – Provides overviews of
•
operating controls and instructions for using the 9926-xHtoS.
This chapter contains the following information:
9926-xHtoS Card Software Versions and this Manual (p. 1-2)
•
Manual Conventions (p. 1-3)
•
Safety and Regulatory Summary (p. 1-5)
•
9926-xHtoS Functional Description (p. 1-6)
•
Technical Specifications (p. 1-13)
•
Warranty and Service Information (p. 1-15)
•
Contact Cobalt Digital Inc. (p. 1-16)
•
9926-XHTOS PRODUCT MANUAL
Chapter 1
Introduction
Chapter 1
®
H-to-S converter/ frame
®
HDMI-To-SDI Converter
®
HDMI-To-SDI Converter
1-1