Safety And Regulatory Summary; Warnings; Cautions; Emc Compliance Per Market - Cobalt Digital Inc 9433-EMDE-75 Product Manual

Introduction

Safety and Regulatory Summary

Warnings

• Do not stare at, or into, broken, or damaged, fibers.
! WARNING !
• Do not stare at, or into, optical connectors.
• Only properly trained and authorized personnel should be permitted to perform laser/
• Ensure that appropriate labels are displayed in plain view and in close proximity to the
To reduce risk of electric shock do not remove line voltage service barrier cover on frame
! WARNING !
equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Cautions

This device is intended for environmentally controlled use only in appropriate video
CAUTION
terminal equipment operating environments.
This product is intended to be a component product of an openGear® frame. Refer to the
CAUTION
openGear® frame Owner's Manual for important safety instructions regarding the proper
installation and safe operation of the frame as well as its component products.
Heat and power distribution requirements within a frame may dictate specific slot
CAUTION
placement of cards. Cards with many heat-producing components should be arranged to
avoid areas of excess heat build-up, particularly in frames using only convection cooling.
The card has a moderate power dissipation (<18 W). As such, avoiding placing the card
adjacent to other cards with similar dissipation values if possible.
If required, make certain Rear I/O Module(s) is installed before installing the card into the
CAUTION
frame slot. Damage to card and/or Rear I/O Module can occur if module installation is
attempted with card already installed in slot.
If card resists fully engaging in rear I/O module mating connector, check for alignment and
CAUTION
proper insertion in slot tracks. Damage to card and/or rear I/O module may occur if
improper card insertion is attempted.

EMC Compliance Per Market

Market
United States of America
Canada
International/CE
9433EMDE-75-110-OM (V1.6)
fiber optic operations.
optical port on the protective housing/access panel of the terminal equipment.
Regulatory Standard or Code
FCC "Code of Federal Regulations" Title 47 Part 15, Subpart B, Class A
ICES-003
CISPR 24:2010
IEC 61000-4-2:2008
IEC 61000-4-3:2006 with A1:2007 and A2:2010
IEC 61000-4-4:2004
IEC 61000-4-6:2008
CISPR 22:2008
9433-EMDE-75/110 PRODUCT MANUAL
Safety and Regulatory Summary
1-5