Chapter 1 Introduction; Overview; Cobalt Reference Guides - Cobalt Digital Inc BBG-1002-2UDX-DI Product Manual

Overview

Cobalt Reference Guides

BBG-1002-2UDXDI-OM (V1.0)
This manual provides installation and operating instructions for the
BBG-1002-2UDX-DI Standalone 3G/HD/SD-SDI Dual-Channel
De-interlacing Up-Down-Cross Converter / Frame Sync unit (also referred to
herein as the BBG-1002-2UDX-DI).
This manual consists of the following chapters:
Chapter 1, "Introduction" – Provides information about this manual
•
and what is covered. Also provides general information regarding the
BBG-1002-2UDX-DI.
Chapter 2, "Installation" – Provides instructions for installing the
•
BBG-1002-2UDX-DI in a frame, and optionally installing a
BBG-1002-2UDX-DI Rear I/O Module.
Chapter 3, "Setup/Operating Instructions" – Provides overviews
•
of operating controls and instructions for using the
BBG-1002-2UDX-DI.
This chapter contains the following information:
Manual Conventions (p. 1-2)
•
Safety and Regulatory Summary (p. 1-4)
•
BBG-1002-2UDX-DI Functional Description (p. 1-5)
•
Technical Specifications (p. 1-12)
•
Warranty and Service Information (p. 1-16)
•
Contact Cobalt Digital Inc. (p. 1-17)
•
®
From the Cobalt web home page, go to
easy to use guides covering network remote control, card firmware updates,
example card processing UI setups and other topics.
BBG-1002-2UDX-DI PRODUCT MANUAL
Chapter 1
Introduction
Chapter 1
Support>Reference Documents
for
1-1