Chapter 1 Introduction; Overview; 9927-2Stoh Card Software Versions And This Manual - Cobalt Digital Inc 9927-2StoH Product Manual

Overview

9927-2StoH Card Software Versions and this Manual

9927-2STOH-OM (V1.0)
This manual provides installation and operating instructions for the
9927-2StoH 3G/HD/SD Dual-Channel openGear
with Per-Channel Frame Sync card (also referred to herein as the
9927-2StoH).
This manual consists of the following chapters:
Chapter 1, "Introduction" – Provides information about this manual
•
and what is covered. Also provides general information regarding the
9927-2StoH.
Chapter 2, "Installation and Setup" – Provides instructions for
•
installing the 9927-2StoH in a frame, and optionally installing a
9927-2StoH Rear I/O Module.
Chapter 3, "Operating Instructions" – Provides overviews of
•
operating controls and instructions for using the 9927-2StoH.
This chapter contains the following information:
9927-2StoH Card Software Versions and this Manual (p. 1-1)
•
Manual Conventions (p. 1-3)
•
Safety and Regulatory Summary (p. 1-5)
•
9927-2StoH Functional Description (p. 1-6)
•
Technical Specifications (p. 1-13)
•
Warranty and Service Information (p. 1-15)
•
Contact Cobalt Digital Inc. (p. 1-16)
•
When applicable, Cobalt Digital Inc. provides for continual product
enhancements through software updates. As such, functions described in this
manual may pertain specifically to cards loaded with a particular software
build.
9927-2STOH PRODUCT MANUAL
Chapter 1
Introduction
Chapter 1
®
SDI-To-HDMI Converter
1-1