Installing The Operator Information Panel Assembly; Removing The Power Supply - IBM xSeries 306m Problem Determination And Service Manual

7. If you are instructed to return the operator information panel assembly, follow all

Installing the operator information panel assembly

To install the replacement operator information panel assembly, complete the
following steps:
1. Guide the operator information panel assembly into position on top of the
2. Use the screws that you removed in step 4 on page 45 of "Removing the
3. Connect the light panel cable and front USB cable to the operator information
4. Install the cover (see "Installing the cover" on page 31).
5. Slide the server into the rack.
6. Connect the cables and power cords (see "Completing the installation" in the
7. Turn on all attached devices and the server.

Removing the power supply

When you remove or install the power supply, observe the following precautions.
Statement 8:
CAUTION:
Never remove the cover on a power supply or any part that has the following
label attached.
Hazardous voltage, current, and energy levels are present inside any
component that has this label attached. There are no serviceable parts inside
these components. If you suspect a problem with one of these parts, contact
a service technician.
Attention:
whose maximum phase to phase voltage is 240 V under any distribution fault
condition.
46
IBM xSeries 306m Types 8849 and 8491: Problem Determination and Service Guide
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
CD/DVD bay housing. Make sure that the LEDs and the USB connectors are
aligned with the openings in the bezel, and that the holes in the board align with
the screw holes in the top of the bay housing.
operator information panel assembly" on page 45 to secure the operator
information panel assembly onto the top of the CD/DVD bay housing.
panel board.
Installation Guide or User's Guide for cabling instructions).
This server is suitable for use on an IT power distribution system,