IBM xSeries 306m Problem Determination And Service Manual page 71

assembly out of the server.
Microprocessor
release latch
7. Open the microprocessor release latch to the fully-open position.
8. Open the microprocessor bracket frame.
Attention: Use the vacuum tool provided with the replacement part to
remove the microprocessor. Dropping the microprocessor during removal can
damage the contacts. Also, contaminants on the microprocessor contacts, such
as oil from your skin, can cause connection failures between the contacts and
the socket.
9. Remove the microprocessor using the vacuum tool and the following
procedure:
Vacuum tool
Microprocessor
Socket
Microprocessor
bracket frame
Chapter 4. Removing and replacing server components
55