NEC NP-PA1004UL-W User Manual page 10

About the projector's light source
• No direct exposure to the beam shall be permitted, RG3 IEC/EN 62471-5:2015.
Operators shall control access to the beam within the hazard distance and
install the product at the height that will prevent exposures of spectators'
PROHIBITION
eyes within the hazard distance.
• Do not look into the projector's lens.
Strong light that could damage your eyes is projected when the projector is
operating. Be especially careful when children are around.
• Do not look at the projected light using optical devices (magnifying glasses,
reflectors, etc.). Doing so could result in vision impairment.
• When turning on the power, operate from the side or rear of the projector
(outside the hazard zone). Also, when turning on the power, make sure no
one within the projection range is looking at the lens.
• Do not allow children to operate the projector alone. When a child is operating
the projector an adult should always be present and watch the child carefully.
• The following graphic symbol indicating that looking into the projector is
prohibited is displayed on top of the projector above the lens mounting unit.
When cleaning the projector
• Do not use flammable gas sprays to remove dust from the lens, cabinet, etc.
Doing so could lead to fire.
PROHIBITION
About option cover (separately sold)
• Do not put bundled cables in the option cover. Doing so may damage the
power cord, resulting in a fire.
• Do not hold the option cover while moving the projector or do not apply
PROHIBITION
excessive force to the option cover. Doing so may damage the option cover,
resulting in injury.
WARNING
ix
Important Information