NEC NP-PA1004UL-W User Manual page 156

DESKTOP REAR
CEILING FRONT
TIP:
• Check whether the automatic [DESKTOP FRONT] is installed within ± 10 degrees for floor installation and whether the [CEILING
FRONT] is within ±10 degrees for ceiling installation. Select manually when the projection screen is inverted.
Selecting Aspect Ratio and Position for Screen [SCREEN]
[SCREEN TYPE]
Sets the aspect ratio of the projection screen.
FREE
4:3 SCREEN
16:9 SCREEN
16:10 SCREEN
NOTE:
• After changing the screen type, check the setting of [ASPECT RATIO] in the menu. (→ page 104)
[POSITION]
Adjust the screen position. Depending on the model you use and the screen type, the function may
become ineffective and the adjustable range may vary.
The ratio of the liquid crystal panel is selected. Select this when projecting multi-screen and 17:9
screen (2K).
For a screen with a 4:3 aspect ratio
For a screen with a 16:9 aspect ratio
For a screen with a 16:10 aspect ratio
126
5. Using On-Screen Menu