Table of Contents
Advertisement
4-2. Using a single projector to project two types of videos at the same
time [PIP/PICTURE BY PICTURE]
The projector has a feature that allows you to view two different signals simultaneously. You have
two modes: [PIP] mode and [PICTURE BY PICTURE] mode.
The projection video in the first screen display is known as the main display while the projection
video that is called out subsequently is known as the sub-display.
Select the projection function under [DISPLAY] → [PIP/PICTURE BY PICTURE] → [MODE] in the on-
screen menu (the default factory setting when shipped is [PIP]). (→ page 111)
• A single screen is projected when power is turned on.
Picture in Picture function
A small sub-display is displayed inside the main display.
The sub-display can be set up and adjusted as follows. (→
page 111, 112)
• Select whether to display the sub-display at the top right,
top left, bottom right or bottom left of the screen (the
size of the sub-display can be selected and the position
can be fine-tuned)
• Switch the main display with the sub-display
Picture by picture function
Display the main display and sub-display side by side.
The main display and sub-display can be set up and ad-
justed as follows. (→ page 111, 112)
• Selecting the display boundary (ratio) of the main display
and sub-display
• Switch the main display and sub-display
Input terminals that can be used for the main screen and sub-screen.
The main screen and sub-screen can provide the following input terminals.
• The main display and sub-display support computer signals up to WUXGA@60HzRB.
HDMI1
HDMI2
Main Display
DisplayPort
COMPUTER
HDBaseT
NOTE:
• Some signals may not appear depending on the resolution.
Sub-Display or additional display
HDMI1
HDMI2
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
67
4. Multi-Screen Projection
Main Display
DisplayPort
COMPUTER
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Main Display
Sub-Display
Sub-Display
HDBaseT
Yes
Yes
Yes
Yes
No
Advertisement
Table of Contents
Troubleshooting
