NEC NP-PA1004UL-W User Manual page 22

Please follow all safety precautions.
Installing the projector
• This projector is an RG3 product. The projector is for professional use and must be installed in
a location where safety is assured. For this reason, be sure to consult your dealer as installation
and attachment/detachment of the lens unit must be performed by a professional service
personnel. Never try to install the projector by yourself. This may result in visual impairment,
etc.
• When planning the layout of the projector, make sure to follow the safety measures listed in
the installation manual.
• In order to avoid danger, either install the device within easy reach of a wall outlet or provide
a device like a breaker to disconnect power to the projector in emergency.
• Take safety measures to prevent human eyes from entering the hazard zone.
• Select an appropriate lens for the installation location and secure the safety zone set for each
lens.
Ensure that appropriate safety measures have been taken when operating the projector,
adjusting the light, etc.
• Check whether the appropriate safety zone for the installed lens has been adequately secured.
Periodically check the zone and maintain a record of verifications.
• Educate the manager of the projector (operator) about safety before operating the projector.
Using the projector
• Instruct the manager of the projector (operator) to perform inspections (Including safety
checks on light emitted by the projector) before powering the projector on.
• Instruct the manager of the projector (operator) to be able to control the projector whenever
the projector is powered on in case of an emergency.
• Instruct the manager of the projector (operator) to keep the installation manual, user's manual
and inspection records in an easy-to-reach place.
• Instruct them to determine whether the projector conforms to the standards of each country
and region.
CAUTION
xxi
Important Information