Check The Product Overview, Supplied Items And Part Names; Introduction To The Projector - NEC NP-PA1004UL-W User Manual

1. Check the product overview, supplied items and part names

1-1. Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.
General
• Liquid crystal type high brightness/high resolution projector
This projector has a display resolution of 1920 dots × 1200 lines (WUXGA) and an aspect ratio
of 16:10. Select [BOOST] under [REF. LIGHT MODE] for a brighter screen.
Model
PA1004UL-W/PA1004UL-B
PA804UL-W/PA804UL-B
When [BOOST] is selected, the cooling fan noise increases. The life of the optical components
may also be shortened depending on the operating environment.
• A proprietary sealed structure that achieves highly dust-proof performance
Due to its excellent dust-proof performance, the projector is not equipped with a filter. Filter
replacement is therefore unnecessary.
• Silent design utilizing a sealed structure
A silent design with no irritating fan noise even in a quiet conference room or classroom.
Light source · Brightness
• A long-life laser diode is equipped in the light module
The product can be operated at low cost because the laser light source can be used for a long
time without requiring replacement or maintenance.
• Brightness can be adjusted within a wide range
Unlike with ordinary light sources, the brightness can be adjusted from 50 to 100% in 1% incre-
ments.
• [CONSTANT BRIGHTNESS] mode
Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode,
sensors inside the projector detect and automatically adjust the output, thereby maintaining
constant brightness throughout the life of the light module.
However, if brightness output is set at the maximum, brightness will decrease with use.
Installation
• Wide range of optional lenses selectable according to the place of installation
This projector supports 9 types of optional lenses, providing a selection of lenses adapted to a
variety of places of installation and projection methods.
Note that no lens is mounted upon shipment from the factory. Please purchase optional lenses
separately.
Brightness
NORMAL: 9000 lm
BOOST: 10000 lm
NORMAL: 7500 lm
BOOST: 8200 lm
1