NEC NP-PA1004UL-W User Manual page 73

Change [REF. LIGHT MODE]
1. With the cursor adjusted to [REF. LIGHT MODE], press the ENTER button.
The [REF. LIGHT MODE] selection screen will be displayed.
2. Use the ▼▲ buttons to make a selection, and press the ENTER button.
The display will return to the [REF. LIGHT MODE] screen and the selected option will be applied.
Press the MENU button to return to the original screen.
NOTE:
• The light module hours used can be checked in [USAGE TIME] on the menu. Select [INFO.] → [USAGE TIME].
• After a lapse of 1 minute from when the projector displays a blue, black or logo screen, [REF. LIGHT MODE] will automatically switch
to [ECO].
• The luminance (brightness) may decrease temporarily depending on the temperature of the operating environment and the [REF.
LIGHT MODE] setting.
This is one of the protection functions called "Forced ECO MODE". When "Forced ECO MODE" is in operation, the TEMP. Indicator lights
up in orange. At the same time, the Thermometer symbol [ ] is displayed at the lower right of the menu screen. The temperature
inside the projector decreases due to the room temperature being lowered, cancelling the "Forced ECO MODE" and returning to the
original brightness.
43
3. Convenient Features