Connecting Your Computer/Connecting The Power Cord - NEC NP-PA1004UL-W User Manual

2-2. Connecting Your Computer/Connecting the Power Cord

1. Connect your computer to the projector.
This section will show you a basic connection to a computer. For information about other con-
nections, see "6. Connecting to Other Equipment" on page 159.
Connect the display output terminal (mini D-sub 15 pin) on the computer to the computer video
input terminal on the projector with a commercially-available computer cable (with ferrite core)
and then turn the knobs of the connectors to secure them.
2. Connect the supplied power cord to the projector.
First connect the supplied power cord's three-pin plug to the AC IN terminal of the projector,
and then connect another plug of the supplied power cord directly in the wall outlet. Do not
use any plug converter.
CAUTION:
• This equipment is designed to be used in the condition of the power cord connected to
earth. If the power cord is not connected to the earth, it may cause electric shock. Please
make sure the power cord is earthed properly.
Do not use a 2-core plug converter adapter.
• Be sure to connect the projector and the computer (signal source) to the same earth point.
If the projector and the computer (signal source) will be connected to different earth
points, fluctuations in the earth potential may cause fire or smoke.
• To prevent the power cord from coming loose, make sure that all the prongs of the power
cord plug are fully inserted into the AC IN terminal of the projector before using the power
cord stopper. A loose contact of the power cord may cause a fire or electric shock.
Upon connecting the power cable, the POWER indicator of the projector will light. (→ page 191)
2. Projecting an Image (Basic Operation)
17