Console Redirection; Table 20: J3/J30 Mini Displayport Connector Pinout - VersaLogic Viper VL-EBX-38ECP Hardware Reference Manual

Table 20: J3/J30 Mini DisplayPort Connector Pinout

Console Redirection

The EBX-38 can be configured for remote access by redirecting the console to a serial
communications port. The BIOS setup utility and some operating systems (such as MS-DOS) can
use this console for user interaction. The default settings for the redirected console are as
follows:
115,200 baud rate

8 data bits, no parity

1 stop bit

No parity

No flow control

EBX-38 Hardware Reference Manual
Pin Signal
1 GND
3 ML_LANE0_P
5 ML_LANE0_N
7 GND
9 ML_LANE1_P
11 ML_LANE1_N
13 GND
15 ML_LANE2_P
17 ML_LANE2_N
19 RTN
Pin Signal
2 HOT PLUG DETECT
4 CONFIG 1
6 CONFIG 2
8 GND
10 ML_LANE3_P
12 ML_LANE3_N
14 GND
16 AUX_CH_P
18 AUX_CH_N
20 DP_POWER
Video Interfaces
42