Each Of The Irqs Must Be Enabled In The Bios Setup Utility Before They Can Be Used. (All Are Disabled By Default.); Pci Bus (On Pc/104-Plus Expansion Modules) - VersaLogic Viper VL-EBX-38ECP Hardware Reference Manual

Hide thumbs Also See for Viper VL-EBX-38ECP:
Table of Contents

Advertisement

Each of the IRQs must be enabled in the BIOS Setup utility before they can be used. (All are
disabled by default.)
Because ISA IRQ sharing is not supported, IRQs may not be available to the ISA bus due to
operating system limitations.
PCI B
(
PC/104-P
US
ON
Refer to the PCI sections of the
interface.
Make sure to correctly configure the PCI slot position jumpers on each PC/104-Plus or PCI-104
module appropriately.
The BIOS automatically allocates I/O, memory, and interrupt resources.
EBX-38 Hardware Reference Manual
IRQ3
IRQ4
IRQ5
IRQ6
IRQ7
E
M
LUS
XPANSION
ODULES
PC/104-Plus Specification
IRQ9
IRQ10
IRQ11
IRQ12
IRQ15
)
for a complete description of this
Expansion Interfaces
50

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viper vl-ebx-38Viper vl-ebx-38ebpViper vl-ebx-38eap

Table of Contents