Video Interfaces; Vga Interface; Figure 19. Vga Connector Location And Pin Orientation - VersaLogic Viper VL-EBX-38ECP Hardware Reference Manual

Hide thumbs Also See for Viper VL-EBX-38ECP:
Table of Contents

Advertisement

The EBX-38 incorporates the Intel Gen-7 graphics core with four Execution Units and Turbo
Boost. It supports two independent displays. It also supported formats including DirectX* 11,
OpenGL 3, VP8, MPEG2, H.264, VC1, 2 HD streams (1080p@30fps), Flash and WMP support.
The analog (VGA), Dual Channel LVDS, and Mini DisplayPort video interfaces support
Extended Desktop, Clone, and Twin display modes.

VGA Interface

The VGA port supports resolutions up to 1920 x 1080 at 60 Hz. This connector uses IEC 61000-
4-2-rated TVS components to help protect against ESD damage.
When the EBX-38 board is booted, the BIOS tests for a video monitor attached to the VGA port.
If a monitor is not detected during this test, the VGA signals are disabled.
The figure below shows the location and pin orientation of the J5 VGA video output connector.

Figure 19. VGA Connector Location and Pin Orientation

EBX-38 Hardware Reference Manual

Video Interfaces

7
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viper vl-ebx-38Viper vl-ebx-38ebpViper vl-ebx-38eap

Table of Contents