VersaLogic Viper VL-EBX-38ECP Hardware Reference Manual page 78

Hide thumbs Also See for Viper VL-EBX-38ECP:

Table of Contents

Using the figure below as a guide, align the mounting holes of the heat sink fan with the



four holes in the passive heat sink. Position the fan so that its power cable is on the side

nearest the J24 CPU fan connector. The CPU fan connector is located between the Mini

DisplayPort connector and the microSD socket (see Figure 2 on page 2).

2. Secure the fan to the heat sink

Affix the heat sink fan using four M3 pan head screws.



Using a torque screwdriver, tighten the screws to 4.0 inch-pounds.



3. Connect power to the fan

Connect the fan's power cable to the J24 CPU fan connector on the Viper board.



Figure 33. Installing the Heat Sink Fan

EBX-38 Hardware Reference Manual

Thermal Considerations

Table of Contents

Viper vl-ebx-38 Viper vl-ebx-38ebp Viper vl-ebx-38eap